PD-45 Light Duty Post Driver   

   The PD-45 is easily operated by one man and is the perfect choice for driving ground rods and various types of steel posts. A special silt fence chuck is required for driving fabric attached silt fence.

    Designed to Drive the Following Posts   

Fiberglass T Posts                        3/4"to 1" Ground Posts

T Posts                                           3/4 to 1-1/2" Reinforced Tent Stakes

1" Concrete Form Pins                 1" to 1-5/8" Pipe

Rectangular Posts                        1.2 to 1.5 lbs/ft Channel Posts

Silt Fence

Weight: 46.3 lbs

Air Consumption: 30 CFM (0.85 m3/min) @ 90 PSI (6.4 kg/cm2)

Body: Ductile iron casting, with excellent wear resistant characteristics. The air inlet is cast into the body and tapped with with 3/4" NPT female threaded ports, along with 1" (25.4 mm) diameter ergonomically designed side handles for easy handling and carrying.

Piston: Alloy steel heat treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running.

Not sure which Rhino Post Driver is right for you?  How to choose a Driver

          For more information or to purchase a Rhino contact us at 414-372-5320 or  by email

          

 3435 N. Buffum St.

 Milwaukee WI 53212

 Phone:(414) 372 5320

 Fax:(414) 264 1519

Rhino | PD-39 | PD-39P | PD-45 | PD-55 | PD-110 | PD-140 | MP-3 | PL-3 | How to Choose