PD-39P Medium Duty Panel Post Driver   

   The PD-39P Panel Post Driver is easily operated by one man and ensures fast erection of temporary panel fencing. Because the PD-39P is so light in weight, the operator must pull down on the spring loaded handles to provide the correct weight for driving.

Designed to Drive the Following Posts   

1-1/4" - 2" Pipe                                 T Posts

Weight: 41 lbs

Air Consumption: 42 CFM (1.19 m3/min) @ 90 PSI (6.4 kg/cm2)

Body: Ductile iron casting, with excellent wear resistant characteristics. 90° air inlet cast into the body.

Piston: Alloy steel heat treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running.

 

Not sure which Rhino Post Driver is right for you?  How to choose a Driver

          For more information or to purchase a Rhino contact us at 414-372-5320 or  by email

          

          

 3435 N. Buffum St.

 Milwaukee WI 53212

 Phone:(414) 372 5320

 Fax:(414) 264 1519

Rhino | PD-39 | PD-39P | PD-45 | PD-55 | PD-110 | PD-140 | MP-3 | PL-3 | How to Choose